You will need:
1] Knife
2] Sand paper
3] Samad Bong or any super glue
4] Paddle which needs change
5] Paddle which you will use rubber from
6] Medical tape
Start with peeling rubber from the main racket with the help of a knife. You need not to be harsh or you might scratch the wood. Afterwards use sand paper to give your paddle a smoothie finish before applying the new rubber.
Now find a loose end on the racket from which you want the rubber. Insert your knife carefully over there and tilt it a bit. Now start scraping and peeling the rubber. Again careful not to be harsh or the rubber won't come off in one piece.Apply the super glue first on racket then on the rubber. Then spread the glue evenly so that its not too thick and neither so miserly applied so unable to full-fill the purpose. Applying lots of glue will damage the neatness of your rubber sticking as it will spill out from the sides so be careful.
Next apply medical tape to the side of your racket to strengthen the grip of rubber on racket this will also protect the rubber from coming off or getting disturbed while the glue is still wet. If you want you can take the tape after two three days when the racket has been exposed to enough heat.
